LED driver MEAN WELL XLG-200-24-A 200W IP20 100-305V 24V

The MEAN WELL XLG-200-24-A is an AC-DC single output LED driver providing constant power mode with built-in power factor correction (PFC). It delivers 24 Vdc at 8.3 A (200 W) from an AC input range of 100–305 Vac. The unit features a compact metal housing and a built-in potentiometer for output adjustment. The product is intended for powering LED modules and linear LED applications where a stable 24 V supply and constant power operation are required.

Advantages

The driver offers constant power operation and integrated PFC to improve input power quality. Its metal housing provides mechanical robustness and heat dissipation, while the built-in potentiometer allows fine output adjustment on site. The 100–305 Vac input range supports wide-voltage mains compatibility, and the 24 V/8.3 A output delivers up to 200 W for medium-power LED installations.

Suitable for

• LED modules and strips requiring 24 V constant power
• Architectural and linear lighting installations
• Indoor fixtures where a compact metal-housed driver is needed

Key specifications

• Brand: MEAN WELL
• Model: XLG-200-24-A
• Output: 24 Vdc, 8.3 A, 200 W (constant power mode)
• Input voltage: 100–305 Vac
• Enclosure: metal housing
• Adjustment: built-in potentiometer
• IP rating (source text): IP20

How to use

Mount the driver according to local electrical codes and ensure adequate ventilation around the metal housing. Connect the AC input to the mains (100–305 Vac) and connect the 24 Vdc output to the LED load observing correct polarity. Use the built-in potentiometer to fine-tune the output within the manufacturer's specified range. Verify connections and test the LED load before final installation.

Recommendations

Install the driver in a dry, ventilated indoor location compatible with its IP20 rating and avoid exposure to moisture. Ensure the selected LED load does not exceed the 200 W constant power rating and follow MEAN WELL installation guidelines for wiring and grounding.