Napájací kábel ProXtend Type-K Dánsko voľný koniec 5 m

The ProXtend Power Cord Type K (5 m) is a 5-metre H05VV-F power cable with a straight male Type K plug on one end and an open end on the other, designed for installations where a customized cable termination is required. The cable has a PVC jacket, three cores of 32 conductors each and a conductor cross-section of 1 mm². Rated for 250 V and 16 A, the cord is suitable for equipment using the Danish Type K mains connector.

Advantages

This Type K power cord provides a standardized straight plug compatible with Denmark and Greenland, a flexible H05VV-F PVC-sheathed cable for indoor use, and an open end that allows easy customization or direct hardwiring to devices or junctions. The 5 m length gives extended reach while the 1 mm² conductor size supports loads up to the specified 16 A rating.

Suitable for

• Powering appliances and equipment in Denmark and Greenland that use a Type K plug
• Custom cable terminations or installations requiring a fixed wiring connection
• Workshops, server rooms or temporary setups where a 5 m open-ended power lead is needed

Key specifications

• Connector 1: Power plug type K (straight male)
• Cable length: 5 m
• Cable type: H05VV-F, PVC jacket
• Conductors: 3 cores, 32 strands each
• Conductor size: 1 mm²
• Rated voltage: 250 V
• Rated current: 16 A
• Colour: Black

How to use

Connect the Type K plug to a compatible mains socket. Prepare the open end by stripping the outer jacket and insulation from each conductor to the appropriate length for the terminal or connection point. Secure each conductor under the correct terminal screw or connector according to the device wiring diagram and relevant installation standards. Ensure all connections are tightened and insulated before applying power.

Recommendations

Use this ProXtend Type K open-end power cord only indoors and in dry environments. Verify the appliance’s voltage and current requirements before connection to ensure they do not exceed 250 V and 16 A. If in doubt about wiring or local regulations, have the cable terminated by a qualified electrician.