Omnidirekcionálna 4G anténa DELOCK 12653 – stožiarová montáž, biela

DELOCK 12653 is an omnidirectional 4G antenna in white, designed for mast mounting and outdoor use. It provides full‑azimuth reception to improve cellular signal coverage for routers, gateways and modem installations. The antenna is intended to enhance mobile data stability and reception across surrounding directions, making it suitable for locations where signal arrives from multiple bearings.

Advantages

The omnidirectional pattern offers consistent reception from all horizontal directions without the need for manual alignment. Weather‑resistant housing and a mast mount design simplify outdoor installation and long‑term deployment. The antenna supports common 4G frequency bands used by mobile networks, enabling improved throughput and reduced dropouts for connected devices.

Suitable for

• Improving cellular reception for outdoor routers and gateways
• Enhancing modem signal stability at remote or suburban sites
• Fixed installations on masts for distributed network access
• Temporary deployments where directional alignment is impractical

Key specifications

• Antenna type: omnidirectional
• Intended use: outdoor mast mount
• Primary application: 4G cellular reception
• Housing colour: white
• Mounting: mast mounting hardware compatible
• Radiation pattern: full azimuth (360° horizontal)

How to use

Mount the antenna on a suitable mast or pole at an elevated position clear of large obstacles and metallic structures. Connect the antenna to the router, gateway or modem using the appropriate coaxial cable and connector type supported by the device. Ensure cable routing avoids sharp bends and is weather‑protected where it passes through enclosures. After installation, verify signal strength and adjust mast height if necessary; the omnidirectional pattern typically removes the need for rotational alignment.

Recommendations

Install the antenna as high as practical and away from interfering equipment to maximise reception. Use weather‑rated cable and sealant at outdoor connection points to prevent moisture ingress. Periodically inspect mounting hardware and cable condition to maintain reliable long‑term performance.