Optický kábel EFB Elektronik O7013.15 15 m ST tyrkysový

The EFB Elektronik O7013.15 is a 15 m OM3 fibre optic cable with ST connectors on both ends. It uses a 50 µm multimode core designed for high-speed data transmission in structured cabling environments and complies with standardized installation practices defined by ISO/IEC 11801. The cable is intended as the shortest link between a passive patch panel port and an active network port or for point-to-point connections between active network devices.

Advantages

The cable features aramid yarn–reinforced strain relief and a halogen-free, flame-retardant jacket meeting IEC-60754-2, IEC-60332-1 and IEC-61034 requirements. EFB connectors meet minimum quality classes (Grade B/2 for singlemode and Grade A/1 for multimode per IEC-61753‑1 and draft IEC-61753-222-2). Each cable is 100% tested and delivered with an individual measurement report.

Suitable for

• Data center patching and rack-to-rack links
• Connections between patch panels and active network equipment
• Short-run multimode high-speed links using OM3 (50 µm) fiber
• Environments requiring halogen-free, flame-retardant cabling

Key specifications

• Brand: EFB Elektronik
• Manufacturer part number (MPN): O7013.15
• EAN: 4049759027728
• Length: 15 m
• Fiber type: OM3 multimode, 50 µm core
• Connector type: ST to ST
• Jacket: Halogen-free, flame-retardant (IEC-60754-2, IEC-60332-1, IEC-61034)
• Strain relief: Aramid yarn reinforced
• Testing: 100% tested with individual measurement report

How to use

Route the fibre optic cable between the required ports avoiding sharp bends and mechanical stress. Insert the ST connectors into compatible ST ports on patch panels or network devices until they click or seat securely. Ensure both ends are clean before connection and protect exposed fibre ends with dust caps when not in use. Follow site-specific cabling and safety rules during installation.

Recommendations

For best performance, keep bend radius above the manufacturer’s minimum (avoid tight loops), inspect and clean connectors before mating, and use this OM3 50 µm ST–ST patch cable for short multimode links such as patch panels to switches or transceivers in data centers and LAN installations.