Prístupový bod EnGenius Fit6 4×4 Lite 2.4 GHz 5 GHz

EnGenius Fit6 4x4 Lite is a dual-band indoor wireless access point supporting 2.4 GHz and 5 GHz bands with IEEE 802.11ax (Wi‑Fi 6) and legacy 802.11a/b/g/n/ac standards. It provides theoretical maximum throughput of 1,148 Mbps on 2.4 GHz and up to 2,400 Mbps on 5 GHz, supports WPA3 and WPA2-PSK/WPA2‑Enterprise security, and includes a single Gigabit Ethernet (10/100/1000 Mbps) port with Power over Ethernet (PoE) for flexible installation in professional and hospitality environments.

Advantages

The access point delivers improved spectral efficiency and higher multi-user capacity thanks to 802.11ax technology and a 4×4 antenna configuration. Built-in WPA3 and WPA2 security modes ensure encrypted connections and compatibility with enterprise authentication. Compact grey housing and PoE support simplify deployment where wall or ceiling mounting and centralized power are required. The device is suitable for managed network environments requiring stable indoor Wi‑Fi coverage.

Suitable for

• Small and medium offices
• Retail stores and shops
• Hotel rooms and common areas
• Classrooms and meeting rooms

Key specifications

• Wireless standards: IEEE 802.11ax/ac/n/a/b/g
• Frequencies: 2.4 GHz and 5 GHz
• Maximum data rate: 2,400 Mbit/s (5 GHz); 1,148 Mbps (2.4 GHz theoretical)
• Ethernet: 1 × RJ-45 Gigabit (10/100/1000 Mbps) with PoE support
• Security: WPA3, WPA2‑PSK, WPA2‑Enterprise
• Colour: Grey
• Weight: 0.57 kg

How to use

Mount the EnGenius Fit6 4x4 Lite in the chosen indoor location (wall or ceiling) following the manufacturer’s mounting instructions. Connect a Gigabit Ethernet cable from your network switch or PoE injector to the device’s RJ‑45 port to provide network access and power. Use the vendor management interface or controller to configure SSIDs, security (WPA3/WPA2), radio settings and channel allocations. Place additional access points as needed to ensure continuous coverage and minimal interference.

Recommendations

For optimal performance, deploy the access point at a central ceiling position to maximize coverage, enable WPA3 where client devices support it, and use channel planning to reduce co‑channel interference. Use PoE from a compliant injector or switch and update firmware regularly to maintain security and stability.