Vodné čerpadlo Gardena 1762-20 400 W 1,3 bar 4000 l/h

The Water Pump Gardena 1762-20 400 W 1.3 bar 4000 l/h is a compact utility pump designed for garden and household water transfer tasks. It delivers up to 4000 litres per hour at a maximum pressure of 1.3 bar and a maximum delivery height of 13 m. The unit is built with a durable plastic housing and an IPX8 water protection rating, and comes with a 10 m cable for flexible placement. This pump is intended for regular outdoor use such as irrigation, water boosting and drainage where a reliable, electrically powered solution is required.

Advantages

The pump provides a balance of power and portability with a 400 W motor that supports continuous water flow up to 4000 l/h. Its IPX8 rating ensures protection against water ingress for safe operation in wet environments. A lightweight plastic housing reduces corrosion risk and simplifies handling and storage. With a delivery height up to 13 m and an included 10 m cable, the device offers practical installation options for various garden and outdoor locations.

Suitable for

• Garden irrigation of lawns, flower beds and vegetable patches
• Supplying water from barrels, ponds or tanks to sprinklers and hoses
• Water transfer and boosting for household outdoor use
• Temporary drainage of shallow flooded areas and waterlogged spots

Key specifications

• Power: 400 W
• Maximum flow rate: 4000 litres per hour
• Maximum pressure: 1.3 bar
• Maximum delivery height: 13 m
• Housing material: durable plastic
• Ingress protection: IPX8 (suitable for continuous immersion conditions as specified by manufacturer)
• Cable length: 10 m

How to use

Position the pump on a stable, level surface close to the water source, ensuring the suction inlet is fully submerged if drawing from a pond or barrel. Connect the outlet to a suitable hose or irrigation line, secure fittings to prevent leaks and plug the unit into a properly grounded electrical outlet. Start the pump and check for proper flow and the absence of air locks; prime if necessary according to the manufacturer's instructions. Monitor the pump during initial operation to confirm stable pressure and flow, and switch off power before relocating or performing maintenance.

Recommendations

Use the pump with clean or slightly particulate water within the limits specified by the manufacturer. Avoid running the pump dry for extended periods. Regularly inspect hoses and connections for wear, and store the pump in a dry place when not in use during freezing conditions to prevent damage.