Zyxel XS1930-12HP-ZZ0101F sieťový switch Managed L3 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) čierna

The Zyxel XS1930-12HP-ZZ0101F is a managed L3 network switch that delivers Multi‑Gigabit connectivity on existing cabling. It provides ten 10G-capable RJ‑45 ports (100M/1G/2.5G/5G/10G) and supports IEEE 802.3bz Multi‑Gigabit standards, enabling higher bandwidth without rewiring. This PoE model supports IEEE 802.3bt (PoE++) with a total power budget up to 375W and per-port power up to 60W, making it suitable as a backbone for WiFi 6 access points, servers and workstations. The switch features a smart fan for near-silent operation, a one‑touch restore button, Layer 3 static routing, and NebulaFlex for optional cloud management or standalone use.

Advantages

The XS1930‑12HP provides Multi‑Gigabit speeds on standard copper wiring, avoiding costly cable upgrades while supporting devices that require speeds above 1 Gbps. Built‑in PoE++ (IEEE 802.3bt) supplies up to 60W per port and a 375W power budget for multiple WiFi 6 APs. The switch offers managed L3 features including VLAN, enhanced QoS, LAG and IPv4/IPv6 static routing, plus a user‑friendly local web interface. NebulaFlex enables easy switching between local management and Zyxel’s license‑free Nebula cloud. The intelligent fan reduces noise for office environments and the robust hardware design targets long‑term stability.

Suitable for

• Small and medium office networks requiring Multi‑Gigabit aggregation
• WiFi 6 deployments where APs need 2.5G/5G connectivity and PoE++ power
• Server rooms and workstations needing 10G or Multi‑Gigabit uplinks
• Environments that need managed L3 features (VLAN, QoS, LAG, static routes)

Key specifications

• Model: Zyxel XS1930‑12HP‑ZZ0101F
• Ports: 10 × RJ‑45 Multi‑Gigabit (100M/1G/2.5G/5G/10G)
• PoE: IEEE 802.3bt (PoE++), up to 60W per port, total budget 375W
• Switching capacity: 240 Gbit/s
• MAC address table: 16,000 entries
• Managed: Layer 3 static routing (IPv4/IPv6), VLAN, QoS, LAG
• Standards: IEEE 802.3bz, 802.3af/at/bt, 802.1s/w/p, 802.3ad, 802.3x, 802.3az, 802.3ab/an/ae
• Weight: 2.8 kg
• Color: Black

How to use

Install the XS1930‑12HP in a standard 19‑inch rack or place it on a stable surface. Connect network devices to the RJ‑45 Multi‑Gigabit ports; the ports will negotiate speeds (100M/1G/2.5G/5G/10G) automatically. For PoE devices, enable PoE on the required ports via the web interface or Nebula cloud and verify power budget allocation to avoid exceeding 375W. Configure VLANs, QoS and LAG as needed for traffic segmentation and performance. Use the one‑touch Restore button to reset configuration when required or switch between standalone and Nebula cloud management through NebulaFlex settings.

Recommendations

For WiFi 6 deployments, connect APs to ports that support 2.5G or 5G and enable PoE++ to provide sufficient power. Plan PoE allocations to keep total power draw within the 375W budget. Use VLANs and QoS to prioritise wireless and latency‑sensitive traffic, and enable Nebula cloud management if remote monitoring and mass configuration are required.