ACT Cat 6 F/UTP inštalačný kábel, plný, PVC, CPR Euroclass ECA, 24 AWG, sivý, 305 metrov

The ACT Cat 6 F/UTP Solid Installation Cable ACT 305m is a 305-meter reel of solid conductor cable designed for structured network installations. Built to support high-speed data transmission, the cable uses 24 AWG solid conductors and F/UTP shielding to reduce external EMI and crosstalk. The outer PVC jacket in grey meets CPR euroclass ECA fire safety requirements, making the cable suitable for installation in commercial and residential buildings where standardized fire performance is required.

Advantages

The cable combines shielded F/UTP construction with solid 24 AWG conductors to deliver consistent signal integrity for Ethernet applications up to Cat 6 performance. The 305 m length on a reel simplifies longer runs and reduces the need for multiple joins. The PVC outer sheath provides mechanical protection and a uniform appearance in installations while complying with CPR ECA rules for reduced flame spread and smoke generation compared with non-rated alternatives.

Suitable for

Key specifications

How to use

Plan the cable route to minimize exposure to sources of strong electromagnetic interference and avoid sharp bends; maintain the cable bend radius recommended for Cat 6 installations. Install the cable on trays or inside conduits where required, pull the cable carefully from the reel to prevent kinks, and terminate using appropriate Cat 6 compatible keystone jacks or patch panels. Use correct grounding and bonding practices where the overall foil shield is connected to equipment earth at a single point as required by site grounding standards.

Recommendations

For optimal performance, test each installed link with a certified cable tester to verify continuity, attenuation and NEXT values and to confirm compliance with Cat 6 limits. Avoid running this cable in direct parallel with high-voltage power lines; if crossings are necessary, do so at right angles. Store reels horizontally and protect from prolonged exposure to UV and extreme temperatures prior to installation.