ACT fialový 1,5 metra LSZH SFTP CAT6A patch kábel snagless s RJ45 konektormi

The ACT Purple 1.5m LSZH SFTP CAT6A patch cable provides a 1.5 metre connection with LSZH outer jacket and S/FTP shielding to reduce electromagnetic interference. It uses full copper AWG#26 conductors and 50µ gold-plated RJ‑45 contacts for reliable signal transmission and is equipped with snagless RJ‑45 connectors. ACT specifications are independently verified and the cable is 100% tested to ensure quality for high-speed networking applications.

Advantages

This CAT6A SFTP cable combines full copper AWG#26 wires with 50µ gold RJ‑45 contacts to deliver consistent conductivity and reduced signal loss. The S/FTP shielding and LSZH jacket decrease interference and smoke/toxic emissions in enclosed spaces. Snagless connectors protect the RJ‑45 latch during installation, while independent ACT certification and 100% testing confirm compliance and reliability.

Suitable for

• High-speed Ethernet connections (up to CAT6A performance)
• Data centres, switch-to-switch and switch-to-server links
• Office networks and structured cabling installations
• Environments requiring low-smoke, zero-halogen cable jackets

Key specifications

• Brand: ACT
• Model / MPN: FB8751
• Length: 1.5 m
• Cable type: S/FTP CAT6A
• Conductor: Full copper AWG#26
• Contacts: 50µ gold-plated RJ‑45
• Connectors: RJ‑45 — RJ‑45 (snagless)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Colour: Purple
• Testing & certification: ACT specifications verified by independent institute; 100% tested

How to use

Plug one RJ‑45 connector into the network device or patch panel port and the other into the corresponding port on the switch, router or endpoint. Ensure connectors are fully seated until the latch clicks. Route the cable to avoid excessive bending or tension and keep it separated from high-power electrical cables to minimize interference. For structured cabling, follow your site’s cable management practices and secure the cable with appropriate ties or organizers.

Recommendations

Use this ACT CAT6A S/FTP patch cable for short patch runs up to 1.5 m between equipment in racks or desks. Avoid sharp bends and keep within the manufacturer’s recommended bend radius; do not exceed intended pull force during installation to preserve performance and connector integrity.