ACT napájací kábel sieťový konektor samec CEE 7/7 (zahnutý) - C13 červený 3 m

The ACT Power cord CEE 7/7 male angled AK5131 is a 3 m power cable with a CEE 7/7 plug and an IEC C13 coupler, designed for 230 V mains. The 3 metre length provides flexibility when connecting active equipment in home or office environments. The cable is supplied in red and manufactured to match common IEC power interfaces for computers and peripherals.

Advantages

This power cord combines an angled CEE 7/7 male connector with a standard C13 coupler to simplify connections to equipment that uses IEC C13 inlets. Its 3 m length allows greater placement freedom for devices, and the red jacket makes the cable easy to identify in multi-cable setups. The cable is suitable for typical 230 V mains and conforms to standard connector types used in professional and consumer devices.

Suitable for

• Desktop computers and workstations with IEC C13 inlets
• Monitors, printers and other office peripherals
• Home audio/video equipment and set-top boxes with IEC C13 sockets
• Temporary power connections where a 3 m reach is required

Key specifications

• Brand: ACT
• Model / MPN: AK5131
• Plug (mains side): CEE 7/7 male, angled
• Connector (device side): IEC 60320 C13 coupler
• Length: 3 m
• Rated voltage: 230 V
• Product colour: Red
• Category: Power cables

How to use

Connect the angled CEE 7/7 plug to a compatible 230 V wall outlet or power strip. Insert the IEC C13 coupler into the device’s IEC C14 inlet until it seats securely. Route the cable to avoid sharp bends and tripping hazards. Disconnect by pulling the plug, not the cable, and power down the connected equipment before unplugging where possible.

Recommendations

Use this cable only with devices rated for 230 V and matching IEC C13/C14 interfaces. Inspect the cable periodically for damage and replace it if the insulation or connectors show wear. Do not attempt repairs if the plug or coupler is damaged; replace the cable to ensure safety.