Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

SFP+ pripojovací kábel CBO J9284B-BL 5 m konektor samec-konektor samec 10 Gbit/s

SFP+ pripojovací kábel CBO J9284B-BL 5 m konektor samec-konektor samec 10 Gbit/s
SFP+ pripojovací kábel CBO J9284B-BL 5 m konektor samec-konektor samec 10 Gbit/s
91,28 €
BlueOptics SFP+ Direct-Attach Cable CBO J9284B-BL is a 5 m copper twinax assembly with male-to-male SFP+ connectors that supports 10 Gbit/s data rates. It is engineered for short-range interconnects in data centre and enterprise network environments, providing a fixed low-latency link between server... Čítať viac
Sklad 90 Kód 1474813 Značka BLUEOPTICS Model J9284B-BL Záruka 2 roky

Doprava a vrátenie tovaru

Predpokladané doručenie streda, októbra 21
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

BlueOptics SFP+ Direct-Attach Cable CBO J9284B-BL is a 5 m copper twinax assembly with male-to-male SFP+ connectors that supports 10 Gbit/s data rates. It is engineered for short-range interconnects in data centre and enterprise network environments, providing a fixed low-latency link between servers, switches and storage devices. The compact, factory-terminated cable eliminates the need for separate transceivers, helping to simplify rack-to-rack and within-rack connections while conserving SFP+ ports and reducing power and cost compared with optical modules.

Advantages

The cable offers stable 10 Gbit/s performance with predictable latency and minimal signal loss across its 5 m length. Its male-to-male SFP+ terminations provide hot-pluggable connectivity compatible with standard SFP+ ports. Being a copper direct-attach solution, it reduces complexity by removing separate transceiver modules and their power draw. The fixed assembly is factory-tested to ensure consistent electrical characteristics and reliable operation in short-reach topologies.

Suitable for

Key specifications

How to use

Insert each SFP+ connector into the corresponding SFP+ port on your switch, server or storage device until the latch engages. Ensure both devices are powered and configured to support a 10 Gbit/s link; link negotiation is handled by the devices and the cable provides the physical layer. For best results, avoid sharp bends and maintain the recommended bend radius for twinax copper assemblies. When removing the cable, release the connector latches before pulling to prevent port damage.

Recommendations

Use this direct-attach cable for short, permanent or semi-permanent 10 Gbit/s connections where power efficiency and low latency are priorities. Verify compatibility with your hardware vendor’s SFP+ port policies and firmware, and keep the cable free from excessive mechanical strain and electromagnetic interference sources to preserve signal integrity.

Hlavné vlastnosti
  • Short-range server-to-switch and switch-to-switch links within racks or between adjacent racks
  • Top-of-rack (ToR) and middle-of-row connections in data centres
  • Storage area network connections with SFP+ interfaces
  • Test lab environments and temporary high-speed links
  • Data rate: 10 Gbit/s
  • Cable type: Copper twinax direct-attach
  • Connector type: SFP+ male-to-male
  • Length: 5 meters
  • Use case: Short-range interconnects (within-rack, rack-to-rack)
  • Latency: Low, fixed-path copper link
Parametre
Dĺžka kábla
5 m
Konektor 1
SFP+
Konektor 2
SFP+
Vývoj ceny za posledných 6 mesiacov
SFP+ pripojovací kábel CBO J9284B-BL 5 m konektor samec-konektor samec 10 Gbit/s
Aktuálna
91,28 €
Najnižšia
89,50 €
Najvyššia
92,97 €
Zmena za 24 h
+1,13 €   +1%
Týždeň
+0,98 €   +1%
Mesiac
+1,11 €   +1%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.