D-Link DGS-1510-28XMP Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) čierna, sivá

The D-Link DGS-1510-28XMP is a managed L2/L3 Gigabit Ethernet switch with 24 PoE RJ-45 ports and 10G SFP+ ports for uplinks or physical stacking. Designed for small to medium enterprise networks, it delivers Layer 3 traffic-management features, industry-standard CLI and web-based configuration, and options for high PoE budgets and energy-saving operation.

Advantages

The switch supports 10G SFP+ stacking of up to six units, enabling fault-tolerant ring or linear topologies and a combined port capacity for large access deployments. It includes advanced management capabilities such as VLANs, MSTP, LACP, static routing, multiple firmware images and configuration files, and centralized management via D-View 8. Security features include IGMP snooping, ACLs, port security and D-Link Safeguard Engine to protect against flooding-based denial-of-service attacks. The series also offers configurable PoE budgets with the option to increase to 740W when using a redundant power supply, and an intelligent fan and silicon optimisations for reduced power consumption.

Suitable for (tasks / use cases)

• Enterprise access layer with PoE for IP phones, wireless APs and cameras
• Small-to-medium business core or distribution switches with 10G uplinks
• Rack-mounted network deployments requiring managed L2/L3 features
• Environments needing physical stacking for simplified management and redundancy

Key specifications

• Model: DGS-1510-28XMP (MPN: DGS-1510-28XMP/E, EAN: 0790069467943)
• Switch type: Managed L2/L3
• Ports: 24 x Gigabit RJ-45 PoE ports, additional 10G SFP+ ports
• Switching capacity: 128 Gbit/s
• MAC address table: 16,384 entries
• 10G support: Yes (SFP+ for stacking/uplinks)
• Networking standards: IEEE 802.1D/Q/p/s/w/x, IEEE 802.3/ad/ae/af/at/x and related
• PoE budgets: selectable options; up to 740W with redundant PSU on specific models
• Weight: 4.25 kg
• Colour: Black, Grey

How to use

Mount the DGS-1510-28XMP in a standard 19-inch rack and connect power. Configure basic management via the web UI, serial console or industry-standard CLI. Create VLANs, set up MSTP and LACP as required, and configure static routes if Layer 3 routing is needed. Use the SFP+ ports and compatible direct-attach cables or transceivers to create a physical stack of up to six units or to provide 10G uplinks to core switches and servers. Allocate PoE power budgets according to attached devices and, if required, install a redundant power supply to increase total PoE capacity.

Recommendations

For best reliability in access deployments, plan PoE power allocation per port before installation, use compatible SFP+ transceivers for stacking or uplinks, and keep firmware and configuration files updated via D-View 8 or the device management interfaces.