Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

DVI-A na VGA adaptér ACT AP1003

DVI-A na VGA adaptér ACT AP1003
60 mes.zadarmo
DVI-A na VGA adaptér ACT AP1003
10,59 €
PDF
PDF
Sklad 300 Kód 2245896 Model AP1003 Záruka 5 rokov

Doprava a vrátenie tovaru

Predpokladané doručenie pondelok 30. novembra
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

Položte otázku – AI asistent odpovie hneď.

Popis

The ACT DVI-A to VGA Adapter AP1003 enables direct analog video connection between DVI-A output devices and VGA displays. It has a DVI-A female connector on one end and a VGA male connector on the other, presented in a compact black housing. The adapter passes analog RGB signals without conversion, making it suitable for connecting older VGA monitors to graphics cards or devices that provide DVI-A analog output.

Advantages

This adapter provides a simple, passive solution for analog video compatibility, preserving signal integrity when both source and display support analog RGB via DVI-A/VGA. Its compact black design makes it easy to install in tight spaces and reduces cable clutter. Because it is a passive adapter, it requires no external power or drivers and works immediately when connected to compatible ports.

Suitable for

  • Connecting a DVI-A equipped graphics card to a VGA monitor
  • Using legacy VGA displays with devices that output analog via DVI-A
  • Simple workstation or office setups requiring analog video compatibility

Key specifications

  • Connector 1: DVI-A female (analog RGB)
  • Connector 2: VGA male (DB-15)
  • Signal type: Analog video (RGB)
  • Colour: Black
  • Form factor: Passive adapter, no power required

How to use

Connect the DVI-A female side of the adapter to the DVI-A output on your computer or video device, then plug a VGA cable from the adapter's VGA male connector into the VGA input of your monitor. Ensure both devices are powered off when making the physical connection, then power them on and select the correct input on the display if required. Because the adapter is passive, no additional configuration or drivers are normally needed as long as the source provides an analog DVI-A signal.

Recommendations

Confirm that your source device outputs analog signals on its DVI port (DVI-A). This adapter will not convert digital-only DVI-D or HDMI signals to VGA. For best results use a high-quality VGA cable and avoid excessive cable lengths to minimise signal degradation.

Hlavné vlastnosti
  • Connecting a DVI-A equipped graphics card to a VGA monitor
  • Using legacy VGA displays with devices that output analog via DVI-A
  • Simple workstation or office setups requiring analog video compatibility
  • Connector 1: DVI-A female (analog RGB)
  • Connector 2: VGA male (DB-15)
  • Signal type: Analog video (RGB)
  • Colour: Black
  • Form factor: Passive adapter, no power required

Parametre

Parametre
Farba produktu
Čierna
Konektor 1
DVI-A
Konektor 2
VGA
Pohlavie konektora 1
Samec
Pohlavie konektora 2
Zásuvka
Vývoj ceny za posledných 6 mesiacov
DVI-A na VGA adaptér ACT AP1003
Aktuálna
10,59 €
Najnižšia 7 d.
10,47 €
Najvyššia 7 d.
10,59 €
Zmena za 24 h
0,00 €   0%
Zmena za 7 d.
+0,12 €   +1%
Zmena za 30 d.
-13,27 €   -56%

Napísať recenziu

Hodnotenie *
Vaše meno sa zobrazí verejne – môžete použiť prezývku. Kupujúcich pozývame, aby písali recenzie; pred zverejnením ich kontrolujeme a zverejňujeme aj kritické.

Viac produktov ACT v tejto kategórii

12

Populárne produkty v tejto kategórii

8
Predajca: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litva · IČO 303192950 · IČ DPH LT100008198612 · Odoslanie z EÚ (Litva)
WhatsApp
Messenger
Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.
Všetky kategórie