Gigabit Ethernet PoE+ injektor Digitus DN-95116 16 portov 250W

The DIGITUS Gigabit Ethernet PoE+ Injector DN-95116 is a 16-port mid-span PoE+ hub that supplies data and power over Ethernet for PoE-capable devices. It provides sixteen Gigabit RJ-45 ports and a total power budget of 250 W, delivering up to 30 W per port and complying with IEEE 802.3af and IEEE 802.3at standards. The unit supports up to 10 Gbps bandwidth on connected links where applicable and includes automatic surge protection. The injector is designed for rack mounting in a 1U form factor and comes in a grey housing.

Advantages

The injector reduces cabling and power-supply complexity by providing centralized PoE power for devices such as access points, VoIP phones and IP cameras. With a 250 W total budget and up to 30 W per port, it accommodates PoE and PoE+ devices while maintaining compliance with IEEE standards. Automatic surge protection helps safeguard connected equipment. Sixteen Gigabit ports ensure high-speed data transfer for each connected device.

Suitable for

• Powering PoE access points in SMB and enterprise networks
• Supplying power to PoE IP cameras for surveillance installations
• Providing power and connectivity for PoE IP telephones
• Use in rack-mounted network cabinets (1U)

Key specifications

• Manufacturer: DIGITUS
• Model: DN-95116
• Ports: 16 × Gigabit RJ-45 (10/100/1000)
• PoE standard: IEEE 802.3af / IEEE 802.3at
• Total PoE budget: 250 W
• Max. per port: up to 30 W
• 10G support: No
• Form factor: 1U rack-mount
• Colour: Grey
• Weight: 2.8 kg

How to use

Install the DN-95116 in a suitable 19-inch rack (1U). Connect the injector’s data input to your network switch or router, then connect the corresponding output ports to PoE-capable devices using Cat5e or better Ethernet cables. Ensure the total power consumption of connected devices does not exceed the 250 W budget and verify device compatibility with IEEE 802.3af/at. Power on the injector and confirm that connected devices receive power and network connectivity.

Recommendations

Locate the injector in a ventilated rack space and use quality shielded or unshielded Ethernet cables. Distribute high-power devices across ports to avoid exceeding the per-port and total power limits. Regularly check firmware and network settings on connected devices; consult the installer manual for surge protection and grounding instructions.