Microconnect FIB224005 InfiniBand/optický kábel 5 m SC žltý

The Microconnect FIB224005 is a 5 m single mode fibre optic cable with SC connectors on both ends, designed for high-speed and long-distance data transmission. Compliant with OS2 standards and manufactured using LSZH jacket, this yellow patch cord is suitable for enterprise networks, telecom rooms, server farms and cloud storage networks where reliable fibre jumper cables are required. The 9 µm core supports 1G/10G/40G/100G Ethernet links and provides low-loss transmission over distances up to 10 km at 1310 nm or up to 40 km at 1550 nm.

Advantages

The cable uses single mode OS2 fibre with a 9 µm core for low attenuation and stable signal quality over long distances. SC–SC connectors on both ends ensure secure, standardized connections and easy installation. The LSZH jacket reduces smoke and toxic gas emission in case of fire and meets common industry standards (IEC, EIA/TIA, Telcordia). The yellow colour coding simplifies identification and cable management in dense installations.

Suitable for

• Enterprise network backbones and inter-rack links
• Telecom rooms and central offices
• Server farms and data centres
• Cloud storage and long-distance Ethernet connections (1G/10G/40G/100G)

Key specifications

• Product: Microconnect FIB224005
• Length: 5 m
• Fiber type: Single mode OS2 (9 µm core)
• Connectors: SC — SC
• Colour: Yellow
• Jacket: LSZH
• Weight: 0.018 kg
• Transmission range: up to 10 km @1310 nm, up to 40 km @1550 nm

How to use

Inspect connectors and fibre ends for cleanliness before installation. Plug each SC connector into the corresponding SC adapter or port until it clicks into place. Route the cable to avoid sharp bends and excessive tension; follow recommended bend radius for single mode fibre. For best performance, use appropriate patch panels or adapters and avoid kinking the LSZH jacket during handling.

Recommendations

Use this SC–SC OS2 patch cord for point-to-point connections in racks and patch panels where single mode, long-distance transmission is required. Clean connector endfaces with suitable fibre cleaning tools before mating and secure the cable to prevent strain; store spare lengths coiled without tight loops.