Píla Einhell TC-SM 2131/1 Dual 4900 ot/min 1500 W

The TC-SM 2131/1 Dual is a drag, crosscut and mitre saw designed for cutting wood, laminated panels and plastic. The saw head tilts continuously to both left and right, allowing mitres to be set on two sides. An integrated mains-powered laser marks the cutting line for quick and precise workpiece positioning. The turntable features an exact angle adjustment with single-handed latching in various positions, and an integrated drag function permits cutting of particularly wide workpieces. Workpiece supports on both sides, a clamping device for secure fixing and a rail-adjustable workpiece stop enable safe, accurate operation. The table insert includes a scale for reading workpiece width. A carbide-tipped precision saw blade provides clean, powerful cuts. Sawdust is collected in a bag, and a dust funnel behind the blade improves dust extraction. A transport brace allows safe and easy mobility.

Advantages

The saw offers flexible mitre adjustment with continuous tilt to left and right and a turntable with precise angle indexing. The integrated drag function expands cutting capacity for wide panels. Built-in laser and readable table scale make alignment fast and accurate. Workpiece supports, a clamp and adjustable stop provide stable, repeatable results. Carbide-tipped blade and improved dust funnel ensure efficient cutting and cleaner workspace. A transport brace supports safe movement of the machine.

Key specifications

• Cutting types: drag cut, crosscut, mitre cut
• Materials: wood, laminated panels, plastic
• Saw head: continuous tilt left and right for mitres
• Laser: mains-powered cutting line marker
• Turntable: exact angle adjustment with single-handed latching
• Drag function: integrated for wide workpieces
• Workpiece handling: supports on both sides, clamping device, adjustable rail stop
• Table insert: width scale for workpiece measurement
• Blade: carbide-tipped precision saw blade
• Dust extraction: sawdust bag and dust funnel behind blade
• Mobility: transport brace

How to use

Place the workpiece on the table and support it with the side supports. Use the clamp to secure the workpiece and set the stop on the rails if repeat cuts are required. Switch on the mains-powered laser to align the cut, then set the required angle on the turntable and latch it in position. For wide workpieces, engage the drag function and perform the cut by pulling the saw head across the workpiece. After cutting, switch off the machine and collect sawdust from the bag; check the dust funnel connection for optimal extraction.

Recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection and dust mask) and ensure the workpiece is firmly clamped before cutting. Regularly inspect and clean the dust funnel and sawdust bag to maintain extraction performance. Replace the carbide-tipped blade when cutting quality decreases.