Puzdro na HDD/SSD GRAUGEAR G-25RD2-AC-10G strieborné 2,5 palca 10 Gbit/s

The GRAUGEAR G-25RD2-AC-10G Silver 2.5" 10 Gbit/s is a dual-bay HDD/SSD enclosure designed for two 2.5-inch SATA III drives. It provides USB Type-C connectivity with USB 3.2 Gen 2 (3.1 Gen 2) performance, enabling data transfer rates up to 10 Gbit/s. The enclosure supports hardware RAID 0 and RAID 1 configurations to prioritize either performance or data redundancy and comes in a silver finish with a compact form factor and a total weight of approximately 0.192 kg.

Advantages

The enclosure supports two 2.5" drives in a single housing, allowing flexible use as expanded external storage or a mirrored backup solution. USB Type-C and USB 3.2 Gen 2 interface deliver up to 10 Gbit/s throughput for faster file transfers compared with older USB standards. RAID 0 offers increased sequential throughput by striping data across both drives, while RAID 1 provides real-time mirroring for data protection. Its SATA III compatibility ensures support for modern SSDs and HDDs in the 2.5" form factor, and the silver finish provides a neutral aesthetic suitable for office and home setups.

Suitable for

• External storage expansion for laptops and desktops
• Fast file transfers and media editing workflows
• Redundant backups using RAID 1 for critical data
• Portable storage for photographers, videographers, and content creators

Key specifications

• Drive bays: 2 × 2.5"
• Supported drive interface: Serial ATA III (SATA III)
• USB version: USB 3.2 Gen 2 (3.1 Gen 2)
• Maximum data transfer rate: up to 10 Gbit/s
• USB connector type: USB Type-C
• Supported RAID levels: RAID 0 (striping), RAID 1 (mirroring)
• Colour: Silver
• Weight: 0.192 kg

How to use

Install one or two 2.5" SATA III drives into the enclosure following the manufacturer's insertion and fastening procedure, then connect the enclosure to a host system using the supplied USB Type-C cable. Select the desired RAID mode according to the device's RAID switch or software utility: choose RAID 0 for higher performance or RAID 1 for mirrored redundancy. Initialize and format the new logical drive in the host operating system before use. Ensure the host system's USB port supports USB 3.2 Gen 2 to achieve the maximum throughput.

Recommendations

Use high-quality SATA III SSDs or enterprise-grade 2.5" HDDs for the best balance of speed and reliability. For critical data, enable RAID 1 and maintain an additional offsite backup. When using the enclosure with laptops, connect via a host USB Type-C port rated for USB 3.2 Gen 2 to realize up to 10 Gbit/s transfer rates; otherwise speeds will be limited by the host interface.