SFP transceiver BlueOptics SFP-10G-ZR-WG-BO 10000 Mbit/s 1550 nm

The BlueOptics SFP-10G-ZR-WG-BO is a 10G SFP+ fiber-optic transceiver designed for long-range single-mode links. It supports a maximum data rate of 10,000 Mbit/s over a 1550 nm wavelength and uses an LC duplex connector for transmit and receive on separate fibers. The module is housed in metal for mechanical durability, operates from a 3.3 V supply and weighs approximately 3 g, making it a compact solution for switches, routers and other network devices that accept SFP+ modules.

Advantages

The transceiver supports long-reach 10GBASE-ZR applications and is compatible with hardware that follows MSA SFP+ standards. Its single-mode 1550 nm optical interface enables extended reach while the metal housing improves thermal behavior and mechanical robustness. The module provides digital diagnostic monitoring (DDM/DOM) capability for real-time parameters such as supply voltage, laser bias current, optical transmit/receive power and temperature, aiding remote troubleshooting and maintenance.

Suitable for

Key specifications

How to use

Insert the SFP-10G-ZR-WG-BO module into any compatible SFP+ slot following the host device manufacturer’s hot-plug procedure. Connect an appropriate single-mode LC duplex patch cable to the module, observing transmit/receive orientation. Verify link negotiation and speed on the host device and, if supported, enable or access DDM/DOM readings through the system management interface to monitor link parameters. Ensure the host device firmware supports third-party SFP+ modules if required by the vendor.

Recommendations

For optimal performance use single-mode fiber and high-quality LC duplex patch cords; ensure both ends of the link are using compatible 1550 nm SFP+ transceivers and confirm that the host hardware supports DDM/DOM if remote diagnostics are needed.