SFP transceiver BlueOptics T8611 1250 Mbit/s 1310 nm

The BlueOptics T8611 1250 Mbit/s 1310 nm SFP transceiver is a compact fiber optic module engineered for single-mode network links. It supports a maximum data transfer rate of 1250 Mbit/s and transmits at a wavelength of 1310 nm. The module's small form factor and 20 g weight make it suitable for installation in switches, routers and other SFP-capable devices where reliable, long-distance optical connectivity is required.

Advantages

The BlueOptics T8611 provides a standardized SFP interface for easy hot-plug installation and interoperability with a wide range of networking equipment. Its 1310 nm wavelength is optimized for single-mode fiber applications and offers a balance between reach and attenuation. The module's low weight and compact silver housing simplify handling and mounting in dense equipment racks.

Suitable for

• Single-mode fiber links requiring 1250 Mbit/s data rate
• Interconnecting switches and routers with SFP ports
• Replacing or upgrading SFP modules in existing fiber networks
• Use in telecom and data centre access or distribution layers

Key specifications

• Interface type: SFP copper-socket form factor for optical transceivers
• Maximum data transfer rate: 1250 Mbit/s
• Wavelength: 1310 nm (suitable for single-mode fiber)
• Form factor: Small Form-factor Pluggable (compact SFP module)
• Weight: approximately 0.02 kg
• Housing colour: silver

How to use

Power down the host device or follow the manufacturer's hot-swap procedure before inserting the SFP transceiver into an appropriate SFP port. Align the module with the port connector and push until it clicks into place. Connect single-mode fiber with LC or compatible connector type to the optical port, observing correct transmit/receive orientation. After installation, verify link status and configure the host device port settings to match the 1250 Mbit/s data rate if required.

Recommendations

Store and handle the transceiver in a clean, static-free environment and keep dust caps on the optical interfaces when not connected. Use the BlueOptics T8611 with certified single-mode fiber cabling and compatible SFP ports. For optimal performance, follow the equipment vendor's guidelines on supported transceiver models and firmware compatibility.