Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s

SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
66,54 €
The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transc... Čítať viac
Sklad 2872 Kód 1485798 Značka BLUEOPTICS Model TOM-10G-SFPP-SR1-BO Záruka 2 roky

Doprava a vrátenie tovaru

Predpokladané doručenie piatok, októbra 23
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transceiver supports high-speed optical transmission over appropriate fiber types and is specified with a long mean time between failures (MTBF) to support continuous operation in network equipment.

Advantages

This SFP+ transceiver delivers 10 Gbit/s data transfer capacity in a compact, silver metal housing and is compatible with standard SFP+ interfaces. Its MSA-conformant design ensures mechanical and electrical interoperability with a wide range of network switches, routers and storage systems that accept SFP+ modules. The unit’s high MTBF provides a measure of long-term reliability for installations that require extended uptime.

Suitable for

Key specifications

How to use

Install the transceiver into an available SFP+ port on compatible network equipment until it latches. Connect the appropriate LC fiber patch cable (single-mode or multimode as required by the link and device support) to the module’s optical interface, observing correct transmit/receive orientation. Configure the host device for a 10 Gbit/s link and verify link status and diagnostics through the system management interface. Power down the host device only if required by the vendor; otherwise hot-plug insertion and removal are supported by SFP+ ports that allow hot-swap operation.

Recommendations

Ensure the transceiver is used in equipment that supports SFP+ modules and the intended optical wavelength and fiber type. Use quality LC duplex patch cords and follow manufacturer guidelines for connector cleaning and handling to maintain link performance. If digital diagnostic monitoring (DDM/DOM) is required, confirm that the host hardware provides DDM support to access real-time module parameters.
Hlavné vlastnosti
  • 10 Gbit/s Ethernet uplinks and aggregation links
  • Fibre Channel over Ethernet and high-speed storage networking
  • Short- to mid-range optical connections in data centers and telecom closets (use appropriate fiber type)
  • Replacement or spare SFP+ module inventory in network hardware supporting SFP+ optics
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Housing material and colour: metal, silver
  • Weight: 0.02 kg (approx. 20 g)
  • Reliability indicator: MTBF approximately 1,000,000 hours
Parametre
Ethernet LAN
Yes
Farba produktu
Silver
Hmotnosť
0.02 kg
Hmotnosť balenia
30 g
Materiál krytu
Metal
Maximálna prenosová vzdialenosť
10000 m
Maximálna prevádzková teplota
70 °C
Maximálna rýchlosť prenosu dát
10000 Mbit/s
Minimálna prevádzková teplota
0 °C
Optický konektor
LC
Podpora jednovidového vlákna (SMF)
Yes
Prevádzková teplota (T-T)
0 - 70
Štandard SFP transceivera
LR
Stredná doba medzi poruchami (MTBF)
1000000 h
Technológia kabeláže optického Ethernetu
10GBASE
Typ rozhrania
SFP+
Typ rozhrania Ethernet
10 Gigabit Ethernet
Typ SFP transceivera
Fiber optic
Vlnová dĺžka Rx (max.)
1310 nm
Vlnová dĺžka Tx (max.)
1310 nm
Vývoj ceny za posledných 6 mesiacov
SFP transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Aktuálna
66,54 €
Najnižšia
65,79 €
Najvyššia
71,11 €
Zmena za 24 h
+0,59 €   +1%
Týždeň
+0,72 €   +1%
Mesiac
-1,90 €   -3%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.