SFP transceiver modul BlueOptics 10-2190-01-BO 125 Mbit/s 1550 nm

The BlueOptics 10-2190-01-BO SFP transceiver module is a single-module fiber optic interface designed for network applications with a maximum data transfer rate of 125 Mbit/s. It operates at a wavelength of 1550 nm and comes in a metal housing with a silver finish. The module is RoHS, FCC and CE compliant and is specified with a mean time between failures (MTBF) of 800,000 hours, making it suitable for installations that require long-term, stable optical links.

Advantages

The module offers a compact SFP form factor and a metal housing for robust mechanical protection and heat dissipation. Operating at 1550 nm, it supports single-mode fiber links and provides a vendor-branded solution from BlueOptics. Compliance with RoHS, FCC and CE standards ensures regulatory conformity for many installations. The stated MTBF of 800,000 hours indicates a long expected operational life.

Suitable for

• Single-mode fiber optic links operating at 1550 nm
• Network equipment with SFP interfaces (switches, routers, media converters)
• Applications requiring a compact transceiver with a metal housing

Key specifications

• Interface type: SFP
• Wavelength: 1550 nm
• Maximum data transfer rate: 125 Mbit/s
• Housing: metal, silver colour
• Weight: 0.02 kg
• Standards compliance: RoHS, FCC, CE
• Mean time between failures (MTBF): 800,000 hours

How to use

Install the SFP transceiver into a compatible SFP slot on your network device following the device manufacturer's instructions. Connect the single-mode fiber cable to the transceiver's optical connector making sure the fiber polarity and connector type match the link requirements. Verify link status and configure the network device as required for the intended data rate and protocol. Ensure proper handling to avoid contamination of optical interfaces and follow ESD precautions when handling the module.

Recommendations

Store and operate the module within the environmental ranges specified by your network equipment vendor. Clean fiber connectors before insertion to maintain signal quality, and confirm device compatibility with the SFP form factor and the 1550 nm single-mode link. Use proper ESD protection during handling.