SFP transceiver modul BlueOptics 155 Mbit/s 1310 nm

The BlueOptics 4063232294391 SFP transceiver module is a compact fiber optic module designed for serial data links with a maximum data transfer rate of 155 Mbit/s. It operates at a wavelength of 1310 nm and fits standard SFP interfaces, offering a lightweight and space-saving solution for point-to-point fiber connections in networking equipment. The module accepts a 3.3 V input supply and is available in a silver housing suitable for rack and chassis installations where small-form pluggable modules are required.

Advantages

The module provides a standard SFP form factor for easy hot-plug installation, low power operation at 3.3 V and compatibility with 1310 nm singlemode fiber links. Its small size and 0.02 kg weight reduce space and load on network devices. Designed for straightforward replacement or upgrade of existing SFP ports, the BlueOptics transceiver supports reliable optical transmission at 155 Mbit/s while maintaining a neutral metallic housing for broad deployment scenarios.

Suitable for

• Short- to medium-distance singlemode fiber connections using 1310 nm wavelength
• Network switches and routers with SFP ports requiring 155 Mbit/s serial links
• Telecommunications and legacy PDH/SDH equipment compatible with SFP interfaces
• Environments where compact, low-weight transceivers are preferred

Key specifications

• Interface type: SFP small form-factor pluggable
• Maximum data transfer rate: 155 Mbit/s
• Operating wavelength: 1310 nm
• Supply voltage: 3.3 V
• Weight: 0.02 kg
• Housing colour: silver

How to use

Insert the SFP transceiver into a compatible SFP slot on the network device while the device is powered down or follow the vendor's hot-plug guidelines for live insertion. Connect the appropriate singlemode fiber cable terminated with matching connectors to the transceiver port, ensuring correct transmit/receive orientation. Verify link status on the host device and configure the interface for the required 155 Mbit/s serial operation if manual configuration is needed.

Recommendations

Use singlemode fiber rated for 1310 nm wavelengths and check connector cleanliness before mating. Ensure the host device supports SFP modules and the required data rate, and follow ESD precautions when handling the transceiver. For installations in racks or chassis, allow adequate ventilation around SFP modules to maintain nominal operating conditions.