SFP+ transceiver modul BlueOptics N-SFPP-LR-BO 10000 Mbit/s 1310 nm

The BlueOptics N-SFPP-LR-BO SFP+ transceiver module provides 10 Gbps fiber connectivity in a compact SFP+ form factor. Designed for single-mode links at a wavelength of 1310 nm, this module is enclosed in a metal housing with a standard SFP+ interface and is powered from a 3.3 V supply. Its lightweight silver casing and industry-standard connector make it suitable for insertion into compatible switches, routers and optical equipment that accept SFP+ modules.

Advantages

The module supports a maximum data transfer rate of 10000 Mbit/s over fiber and uses a common 1310 nm wavelength for medium- to long-reach single-mode links. Its metal enclosure offers mechanical durability and electromagnetic shielding while the SFP+ form factor ensures hot-pluggable installation in many network devices. The low weight (approximately 20 g) and standard 3.3 V operation simplify handling and integration into existing infrastructure.

Suitable for

Key specifications

How to use

Ensure the host device supports SFP+ modules and is powered off or in a state that allows hot-plugging according to the device manual. Gently insert the transceiver into an SFP+ slot until it clicks into place, then connect the single-mode fiber cable to the optical port. Power up the host equipment (if powered down) and verify link status via the device's management interface or LEDs. Follow the network equipment vendor's instructions for any required interface configuration such as speed, duplex or optical monitoring parameters.

Recommendations

Use clean, properly terminated single-mode fiber cables and inspect connectors before mating to avoid contamination and signal loss. Match the transceiver wavelength and reach expectations to the fiber type and link distance. Operate the module within the host device's specified temperature and power ranges and consult equipment compatibility lists if vendor lock or firmware checks are enforced.