SFP transceiver modul BlueOptics SFP-1000-SM13-10I-BO 1250 Mbit/s 1310 nm

The BlueOptics SFP-1000-SM13-10I-BO is a single-mode fiber SFP transceiver module designed for 1250 Mbit/s optical data transmission at a wavelength of 1310 nm. Compact and lightweight (approximately 40 g) with a 3.3 V supply requirement and a silver housing, this SFP module provides a standardized SFP form factor and LC Duplex-compatible optical interfacing for point-to-point links up to 10,000 m over single-mode fiber. The module follows MSA-compatible specifications and supports common gigabit applications in switches, routers and media converters where a 1000BASE-LH or similar single-mode 1310 nm link is required.

Advantages

The module offers a compact SFP footprint and low-power 3.3 V operation, making it suitable for dense networking equipment. Its single-mode 1310 nm optical interface enables long-distance links up to the specified maximum transfer distance. Being manufactured to MSA form-factor and optical standards, the transceiver ensures broad compatibility with networking hardware that accepts SFP 1000BASE-LH type modules. The silver metal housing contributes to mechanical robustness and EMI resistance for stable optical performance.

Suitable for

Key specifications

How to use

Install the module into a compatible SFP slot on your switch, router or media converter while the host device is powered down or following the manufacturer's hot-swap instructions. Connect single-mode LC Duplex fiber patch cords to the transceiver's optical port, ensuring correct transmit/receive orientation. Confirm that the host device is configured to recognise 1000BASE-LH or equivalent SFP modules and check link status indicators on the equipment. Use appropriate fiber patch panels or protective adapters to maintain connector cleanliness and stable mechanical connections.

Recommendations

For reliable long-distance performance, use single-mode fiber rated for 1310 nm and maintain clean LC connector endfaces. Verify that the host hardware supports the required digital diagnostic monitoring (DDM/DOM) functions if real-time monitoring of voltage, temperature, laser bias and optical power is needed. Follow standard ESD precautions and handle the transceiver by its housing to avoid contaminating the optical interface.