SFP transceiver modul BlueOptics SFP-25G-SR-MP-BO optický SFP28 LC

The BlueOptics SFP-25G-SR-MP-BO is a fiber optic SFP28 transceiver module designed for high-speed network environments. It supports 25GBASE-SR optical transmission over multimode fiber using an LC duplex connector and is housed in an aluminium enclosure weighing approximately 20 g. The module implements both transmitter and receiver at 850 nm and conforms to MSA form-factor standards for SFP28 modules, making it suitable for insertion in compatible SFP28 ports.

Advantages

The module provides 25 Gbit/s data transmission capability with LC duplex connectivity and multimode fiber support, enabling short-reach high-bandwidth links up to typical multimode distances. Constructed in an aluminium housing, the transceiver is lightweight and designed for compatibility with hardware that accepts SFP28 MSA-compliant optics. Digital diagnostic monitoring (DDM/DOM) functionality is available where supported by the host device, allowing readout of operating parameters such as supply voltage, laser bias, output and received power, and temperature.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP-25G-SR-MP-BO by inserting the module into an empty SFP28 slot on a compatible switch, router or host device while the device is powered according to the vendor’s installation procedure. Connect an LC duplex multimode fiber patch cable to the module’s LC port, ensuring correct transmit/receive orientation. If the host device supports digital diagnostics, monitor operating parameters via the management interface to verify link status and signal levels. Follow standard electrostatic discharge (ESD) precautions when handling the transceiver and keep protective caps on the optical ports when the module is not connected.

Recommendations

For optimal performance, use high-quality multimode fiber and LC duplex patch cables rated for 25G applications and ensure that the host hardware officially supports SFP28 25GBASE-SR optics. Verify DDM/DOM compatibility in the system firmware to enable remote monitoring. Store and operate the module within the environmental limits specified by your network equipment vendor and avoid bending fiber beyond recommended radii to maintain link quality.