Sieťový kábel Digitus CAT 5e SF/UTP RJ-45 0,5 m zelený

The DIGITUS Network Cable CAT 5e SF/UTP RJ-45 0.5 m in green is a Category 5e patch cord designed for structured cabling and Ethernet applications up to 100 MHz. The cable uses copper conductors, features RJ-45 connectors on both ends and a transparent blue coloured plug with metal shielding for easy identification of the Cat5e class. The cable is PoE ready and built to meet ISO/IEC 11801 and DIN EN 50173 Category 5e specifications.

Advantages

This Cat 5e SF/UTP patch cord is manufactured and tested to ISO/IEC 11801 and DIN EN 50173 standards, ensuring compliance with ISO & EN channel specification requirements. The shielded connector and SF/UTP construction reduce interference and support reliable performance for 10/100/1000Base-T(X) applications. Each cable has a molded boot with kink protection, strain relief and a latch protection to prevent the latching lever from breaking. The transparent blue plug enables quick visual identification of Category 5e.

Suitable for

• Connecting network devices in office and home environments
• 10/100/1000Base-T(X) Ethernet connections
• Power over Ethernet (PoE) enabled devices
• Structured cabling installations requiring Cat5e compliance

Key specifications

• Length: 0.5 m
• Cabling: SF/UTP (shielded foil with unshielded twisted pairs) / S-FTP
• Connectors: RJ-45 to RJ-45
• Conductor material: Copper (Cu)
• Performance: Category 5e — up to 100 MHz
• Colour: Green (cable) with transparent blue coloured plug
• Standards: ISO/IEC 11801, DIN EN 50173
• MPN: DK-1531-005/G
• EAN: 4016032213727

How to use

Plug the RJ-45 connector into the network port of your device and the other end into a switch, router or patch panel. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends; the molded boot provides kink protection and strain relief. For PoE devices, confirm the switch or injector supports the required PoE class before connecting.

Recommendations

For optimal performance, maintain cable bends above the minimum bend radius, avoid running the cable parallel to strong electromagnetic sources, and use appropriate patch panels or cable management to prevent strain on connectors.