Sieťový kábel EFB Elektronik K8706.2 RJ-45 Cat5e 2 m zelený

The EFB Elektronik K8706.2 is a 2 m Cat5e patch cable with S/UTP construction, designed for 10/100/1000Base-T(X) networks. It uses 4 pairs of AWG26/7 conductors, a braid shield and flame-retardant PVC jacket, and is fitted with two shielded Hirose TM11 RJ45 plugs (IEC 60603-7-3) coded to TIA/EIA-568B. The cable is green and supports data rates up to 1000 Mbit/s for typical Gigabit Ethernet applications.

Advantages

The shielded Hirose TM11 RJ45 plugs and braid shielding reduce electromagnetic interference and help maintain signal integrity in environments with potential noise. The 2 m length and flexible PVC jacket make the cable suitable for rack-to-rack or device-to-wall connections while the flame-retardant construction meets IEC 60332-1 safety requirements. The mounted strain relief boot improves connector durability without an external latch protector.

Suitable for

• Gigabit Ethernet connections (10/100/1000Base-T)
• Network patch panels and switches in office or data centre racks
• Short to medium horizontal cabling between equipment (2 m reach)

Key specifications

• Cable category: Cat5e (100 MHz)
• Length: 2 m
• Connectors: 2 × Hirose TM11 RJ45 shielded (IEC 60603-7-3), TIA/EIA 568B coded
• Conductor: 4 × 2 × AWG26/7
• Construction: S/UTP with braid shielding
• Jacket: PVC, flame retardant to IEC 60332-1
• Colour: Green
• Data rate: up to 1000 Mbit/s

How to use

Connect each RJ45 plug to the corresponding Ethernet port on your network devices, ensuring the connectors are fully seated. Use the 2 m length to route between switches, patch panels or networked devices; avoid sharp bends and excessive tension on the cable. The mounted strain relief boot provides additional protection at the connector end during normal use.