Sieťový kábel Telegärtner Cat.7 MP8 FS 600 LSZH 5 m 1x90-stupňový

Telegärtner Cat.7 MP8 FS 600 LSZH 5m with 90-degree connector is a shielded Cat.7 patch cord designed for high-speed network connections. The cable supports up to 600 MHz bandwidth and uses LSZH (Low Smoke Zero Halogen) materials for the jacket and moulded strain relief boot, reducing smoke and hazardous gases in case of fire. The plug is fully shielded with 360° surrounding shielding (for shielded cable types) and the assembly is flexible with moulded strain relief to minimise bending stress. Termination follows the EIA/TIA 568 wiring sequence and the cable is wired 1:1 S/FTP.

Advantages

The cable provides a Category 7 performance up to 600 MHz according to ISO/IEC 11801 ed.2, ensuring high data transmission quality for demanding applications. The fully shielded MP8 plug and S/FTP construction reduce electromagnetic interference. LSZH jacket and boot improve safety in enclosed spaces by emitting less smoke and halogenated gases if exposed to fire. The 90-degree connector and flexible construction simplify installation in tight spaces and help maintain reliable contact under strain.

Suitable for

• High-speed LAN backbones and horizontal cabling
• Server rooms and data centres with shielded cabling requirements
• Installations in confined spaces or behind equipment where a 90-degree connector is beneficial
• Environments requiring low-smoke, zero-halogen materials for safety compliance

Key specifications

• Brand: Telegärtner
• Model: Cat.7 MP8 FS 600 LSZH
• Length: 5 m
• Connector: 1x 90-degree MP8 plug, fully shielded (360°)
• Cable type: S/FTP, Cat.7, 1:1 wiring
• Bandwidth: up to 600 MHz
• Standards: ISO/IEC 11801 edition 2; termination EIA/TIA 568
• Jacket / boot material: LSZH (Low Smoke Zero Halogen)
• MPN: L00003A0121
• EAN: 4018359361594

How to use

Connect the 90-degree MP8 plug to the corresponding shielded port on network equipment, ensuring correct alignment and full insertion for reliable contact. Route the cable avoiding sharp bends and excessive tension; the moulded strain relief boot helps protect the connector area. Use the standard EIA/TIA 568 termination sequence when integrating with patch panels or outlets. Verify shielding continuity when connecting to other shielded components to maintain overall performance.

Recommendations

For optimal performance, use this Cat.7 S/FTP patch cord in shielded network segments and maintain bend radii recommended by the manufacturer. Inspect connectors for damage before installation and avoid placing the cable near strong electromagnetic interference sources despite the shielding. Choose LSZH cabling where reduced smoke and halogen emissions are required by local regulations or building codes.