Slepý nit GESIPA 1433471 hliník oceľ sivá 6,5 mm 3 mm 10 mm

Blind rivet GESIPA 1433471 is a mixed-material fastener with an aluminium body and a steel mandrel. It has a head diameter of 6.5 mm, a shank (tail) diameter of 3 mm and an overall length of 10 mm. Supplied in a pack of 500 pieces and weighing 1.155 g per package, this blind rivet is intended for creating permanent, load-bearing joints in sheet materials where access is only possible from one side.

Advantages

The standard GESIPA blind rivet design combines an aluminium sleeve and a steel mandrel to provide a balance of corrosion resistance and strength. Available in a variety of designs, shapes and lengths, this model offers consistent setting performance and reliable clamping force for general fastening tasks. Its mixed-material construction makes it suitable for many common applications where a durable, single-sided installation is required.

Suitable for

• Joining thin sheets and panels
• Applications with access from one side only (blind joints)
• General metal-to-metal and metal-to-plastic fastening
• Assembly tasks in maintenance, HVAC and light fabrication

Key specifications

• Brand: GESIPA
• Model / MPN: 6300162 (GESIPA 1433471)
• Material: Aluminium sleeve, steel mandrel
• Head type: Dome head
• Head diameter: 6.5 mm
• Shank (tail) diameter: 3.0 mm
• Length: 10 mm
• Pack quantity: 500 pieces
• EAN: 4007081300162

How to use

Drill a hole matching the rivet shank diameter (3.0 mm) through the materials to be joined. Insert the rivet into the hole so the dome head sits flush on the visible face. Using a suitable blind-rivet tool (manual, pneumatic or battery-powered), pull the mandrel until the sleeve swages and clamps the materials together; the mandrel will break off at the designed break point. Remove any mandrel remnants from the tool and inspect the rivet setting to ensure a secure joint.

Recommendations

Use the specified 3.0 mm drill size and an appropriate rivet tool for consistent results. For dissimilar metals or environments with increased corrosion risk, verify material compatibility and consider additional corrosion protection if needed.