Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm

SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
75,63 €
The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is... Čítať viac
Sklad 20 Kód 1485840 Značka BLUEOPTICS Model TRPEG1EEXC000E2G-BO Záruka 2 roky

Doprava a vrátenie tovaru

Predpokladané doručenie pondelok, októbra 26
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is designed to fit standard SFP ports using an LC duplex optical interface. The transceiver supports link reach up to 40,000 m over appropriate single‑mode fiber.

Advantages

The module follows MSA‑compatible SFP form‑factor standards to ensure mechanical and electrical interoperability with compatible network equipment. A compact metal enclosure provides mechanical protection and thermal stability. With support for 1310 nm optical transmission and a rated maximum distance of 40 km, the transceiver is suitable for long‑reach Ethernet and related optical protocols. Low weight and a standard 3.3 V interface simplify installation and replacement in switches, routers and media converters.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures recommended by your hardware vendor before inserting the SFP module into an SFP cage. Insert the transceiver into an empty SFP slot until it latches, then connect LC duplex patch cords to the transmit and receive ports, observing correct fiber polarity. Configure the host device for the intended optical link speed and protocol (up to 1250 Mbit/s) and verify link status through the device management interface. If the host supports digital diagnostic monitoring (DDM/DOM), enable or query the DDM functions to read real‑time parameters where available.

Recommendations

Use single‑mode LC duplex fiber and compatible patch cords for best range and signal quality. Verify compatibility with the target switch or router model and ensure the host firmware accepts third‑party SFP modules if required. Keep optical connectors clean and capped when not in use; follow ESD precautions when handling the transceiver.

Hlavné vlastnosti
  • Single‑mode fiber links up to 40 km (1000BASE‑LH style applications)
  • Gigabit Ethernet and other 1.25 Gbit/s optical interfaces
  • Installation in switches, routers, media converters and compatible SFP slots
  • Point‑to‑point backbone connections and campus interconnects
  • Maximum data rate: 1250 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 40,000 m (40 km) over single‑mode fiber
  • Optical connector type: LC duplex (SFP form factor)
  • Supply voltage: 3.3 V
  • Product colour / finish: silver metal housing
  • Weight: approx. 0.02 kg
Parametre
Duplexný systém
Full
Farba produktu
Silver
Hmotnosť
0.02 kg
Hmotnosť balenia
30 g
Materiál krytu
Metal
Maximálna prenosová vzdialenosť
40000 m
Maximálna prevádzková teplota
70 °C
Maximálna rýchlosť prenosu dát
1250 Mbit/s
Optický konektor
SFP
Počet produktov v balení
1 pc(s)
Prevádzková teplota (T-T)
0 - 70
Štandard SFP transceivera
LH
Technológia kabeláže optického Ethernetu
1000BASE
Teplota skladovania (T-T)
0 - 90
Typ rozhrania
SFP
Typ SFP transceivera
Fiber optic
Vlnová dĺžka
1310 nm
Vlnová dĺžka Rx (max.)
1310 nm
Vlnová dĺžka Tx (max.)
1310 nm
Vstupné napätie
3.3
Vývoj ceny za posledných 6 mesiacov
SFP transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Aktuálna
75,63 €
Najnižšia
73,05 €
Najvyššia
78,12 €
Zmena za 24 h
+1,02 €   +1%
Týždeň
+0,91 €   +1%
Mesiac
+0,37 €   +0%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.