SFP transceiver modul BlueOptics AFBR-5710PZ 1250 Mbit/s 850 nm

The BlueOptics AFBR-5710PZ 1250 Mbit/s 850 nm SFP transceiver module is a compact optical interface designed for short-range fiber connections in network equipment. It supports up to 1250 Mbit/s data transfer at an 850 nm wavelength and is intended for use in devices that accept SFP modules. The module’s lightweight silver housing and SFP form factor make it compatible with a wide range of switches, routers and fiber ports that require small-form-factor pluggable transceivers.

Advantages

The module provides reliable multimode fiber connectivity for Gigabit-speed links with a standardized SFP interface, allowing hot-plug installation and straightforward interoperability. Its compact dimensions and low weight simplify handling and spare-part stocking. Operation at 850 nm is optimized for short-reach multimode fiber runs used in typical data center and campus networks.

Suitable for

• Short-range multimode fiber links in data centers
• Gigabit Ethernet connections where SFP ports are available
• Upgrading or replacing SFP transceivers in switches and routers
• Interconnects between network equipment racks and cabinets

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Operating wavelength: 850 nm
• Physical weight: 0.02 kg (20 g)
• Housing colour: Silver

How to use

Insert the BlueOptics AFBR-5710PZ into a compatible SFP slot on your network device while the device is powered on if hot-plugging is supported, or follow the device manufacturer’s guidance for safe insertion and removal. Connect the appropriate multimode fiber cable with matching LC/SC connector types as required by your equipment, and verify link status via the device’s management interface or LED indicators. Ensure that transceiver and port settings (speed and duplex) match the network configuration.

Recommendations

Use this transceiver for short-reach multimode applications and pair it with suitable multimode fiber (OM1/OM2/OM3/OM4) and compatible connectors. Store and handle the module in a clean environment, protect fiber endfaces from contamination, and follow electrostatic discharge (ESD) precautions when installing or removing the transceiver.