SFP transceiver modul BlueOptics SFP10G-TR85-BO 10000 Mbit/s 850 nm

The BlueOptics SFP10G-TR85-BO is a fiber optic SFP+ transceiver module designed for 10 Gigabit connections. It supports a maximum data transfer rate of 10000 Mbit/s and operates at an 850 nm wavelength over multimode fiber. The module comes in a durable metal housing, measures very little and weighs approximately 2 g, and requires a 3.3 V input supply. It uses an LC duplex connector and is intended for insertion into SFP+ ports that accept MSA-compliant transceivers.

Advantages

The module provides 10GBASE-SR class optical transmission at 850 nm suitable for short-range multimode fiber links. Its compact metal housing offers mechanical robustness and thermal stability while keeping weight minimal. The SFP+ form factor and compliance with common MSA standards make it broadly compatible with network equipment that supports SFP+ modules and 10GBASE-SR optics. Low power operation at 3.3 V and straightforward hot-pluggable installation simplify integration into existing infrastructure.

Suitable for

Key specifications

How to use

Ensure that the target switch, router or other network device supports SFP+ 10G optical transceivers and the 10GBASE-SR profile. With the device powered or powered down according to the vendor’s guidance, insert the BlueOptics SFP10G-TR85-BO into an available SFP+ port until the module latches. Connect both fibers of an LC duplex patch cable, observing correct transmit/receive orientation. Verify link status via the host device’s port indicators or management interface after power-up. If digital diagnostic monitoring (DDM/DOM) is supported by the host, use the device management tools to read optical parameters such as supply voltage, transmit/receive power and temperature.

Recommendations

Use certified multimode fiber patch cords and verify fiber type (e.g., OM3/OM4) to achieve expected reach at 10 Gbit/s. Confirm host compatibility with SFP+ transceivers before installation and follow the equipment vendor’s instructions for hot-plugging and firmware requirements. For troubleshooting, consult the host’s diagnostics to read optical power and temperature values when DDM/DOM is available.