Účet Kontakt
Váš košík
Doručenie cez DPD a FedEx
Pomoc? Opýtajte sa AI

SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm

SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
91,28 €
The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and... Čítať viac
Sklad 90 Kód 1484949 Značka BLUEOPTICS Model SFP-GLSD-70-A-BO Záruka 2 roky

Doprava a vrátenie tovaru

Predpokladané doručenie streda, októbra 21
O stave zásielky Vás budeme priebežne informovať prostredníctvom nášho podrobného systému sledovania zásielok
Možnosti platby
Platobná kartaVisaMastercardPayPalApple PayGoogle PayBankový prevod

The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and uses a standard SFP interface with an LC duplex optical connector. It requires a 3.3 V supply and is intended for use in networking equipment that accepts MSA‑compliant SFP transceivers.

Advantages

The module follows MSA SFP form‑factor standards, which helps ensure interoperability with a wide range of switches, routers and storage devices that support compatible 1000BASE‑ZX transceivers. Its metal housing provides mechanical stability and thermal dissipation while the lightweight design keeps module weight minimal. Operating at 1550 nm and rated for up to 1250 Mbit/s, it is suitable for long‑reach single‑mode fiber links when used with appropriate patch cords and fiber infrastructure.

Suitable for

Key specifications

How to use

Install the transceiver into an SFP slot of a compatible network device while the device is powered according to the vendor guidance or hot‑plug as supported. Connect LC duplex single‑mode patch cords to the transmitter and receiver ports, ensuring correct TX/RX orientation and proper fiber polishing/cleaning. Configure the host device network settings to enable the link and verify operational parameters such as link speed and diagnostics through the device management interface. Confirm that the receiving endpoint and any intermediate equipment support 1550 nm single‑mode optics and the expected link distance.

Recommendations

Use high‑quality single‑mode LC duplex patch cords and clean connector endfaces before mating. Verify compatibility with the host hardware and enable Digital Diagnostic Monitoring (DDM/DOM) on platforms that support it to monitor supply voltage, optical power and temperature for proactive maintenance.

Hlavné vlastnosti
  • Long‑reach single‑mode fiber Ethernet links (1000BASE‑ZX)
  • Interconnection of switches, routers and optical aggregators
  • Fibre Channel over Ethernet and SDH/SONET applications up to 1.25 Gbit/s
  • Replacement of MSA‑compatible SFP transceivers in compatible hardware
  • Interface type: SFP (MSA form factor)
  • Maximum data transfer rate: 1250 Mbit/s
  • Wavelength: 1550 nm
  • Connector: LC duplex (optical)
  • Supply voltage: 3.3 V
  • Housing: metal
  • Weight: approx. 0.003 kg
  • Fiber type: single‑mode
Parametre
Duplexný systém
Full
Farba produktu
Silver
Hmotnosť
0.003 kg
Hmotnosť balenia
2 g
Materiál krytu
Metal
Maximálna prenosová vzdialenosť
80000 m
Maximálna prevádzková teplota
70 °C
Maximálna rýchlosť prenosu dát
1250 Mbit/s
Minimálna prevádzková teplota
0 °C
Množstvo v balení
1 pc(s)
Optický konektor
SFP
Prevádzková teplota (T-T)
0 - 70
Štandard SFP transceivera
ZX
Technológia kabeláže optického Ethernetu
1000BASE
Teplota skladovania (T-T)
-40 - 85
Typ rozhrania
SFP
Typ SFP transceivera
Fiber optic
Vlnová dĺžka
1550 nm
Vlnová dĺžka Rx (max.)
1550 nm
Vlnová dĺžka Tx (max.)
1550 nm
Vstupné napätie
3.3
Vývoj ceny za posledných 6 mesiacov
SFP transceiver modul BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Aktuálna
91,28 €
Najnižšia
89,35 €
Najvyššia
92,83 €
Zmena za 24 h
+1,27 €   +1%
Týždeň
+1,12 €   +1%
Mesiac
+1,25 €   +1%

Populárne produkty v tejto kategórii

Dobrý deň, som AI asistent DistriNode. Pomôžem Vám nájsť produkty, porovnať možnosti, vytvoriť cenovú ponuku v PDF alebo otvoriť požiadavku na podporu.